![]() Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Go to for help and information, such as product manuals, frequently asked questions, videos, and customer support.Īll rights reserved. The device withstands incidental exposure of vertically falling water droplets. Unplug the trainer when it is not in use.Sync your indoor training data with your Garmin Connect ™ account.ĭevice Information Device Care and Storage.Manage your training, customize the default settings, and diagnose issues.Create your own rides, workouts, and more.Ride exciting courses without leaving your home.You can download the Tacx Training app to your compatible phone, tablet, or computer. Rotate the crank arm to check for clearance.The power LED is green during normal operation. Plug the power cable into a standard wall outlet.Plug the power cable connector into the Tacx FLUX 2/S port.Tighten and close the quick release skewer or thru axle.Align the rear axle of the bike with the trainer frame.Attach the front leg to the trainer using the bolts, washers, and hex key.Place the trainer on a firm and level surface.Failure to tighten and firmly close the quick release lever may result in injury or property damage. Use a 17 mm bike wrench to tighten completely.įor direct-drive trainers, the rear axle must be installed properly.Insert the end cap into the trainer, and hand tighten.If the axle is 12 x 148 mm, use the end cap.If the axle is 12 x 142 mm, use the end cap.On the non-drive side, select an option:. ![]() On the drive side, use a hex key to remove the end cap.If you have a 135 mm quick release end cap or thru axle, you can swap the end caps. Standard 130 mm quick release end caps are mounted on the trainer. You should refer to the owner's manual provided with your cassette. If you have a different cassette style, such as Campagnolo ®, SRAM XD, or XD-R, go to to purchase the compatible freehub body.If you have a Shimano or SRAM 11 or 12 speed cassette, use the standard freehub body with no spacer.If you have a Shimano ® or SRAM ® 8, 9, or 10 speed cassette, use the standard freehub body with a spacer.Place the trainer on its side with the freehub body facing up.NOTE: A cassette is not included with the trainer. ![]() Quick release end cap and 135 mm axle (QR x 135 NDS)ġ2 mm thru-axle, drive-side end cap (12 DS)ġ2 mm x 142 mm thru-axle, non-drive-side end cap (12 x 142 NDS)ġ2 mm x 148 mm thru-axle, non-drive-side end cap (12 x 148 NDS) You should check the package for all the required parts. Tacx FLUX 2, FLUX S - Trainer Manual Trainer Parts
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |